Technical Feature
It is a race-specific clutch with dramatically improved back torque control and clutch operability, and greatly improved maintainability.

1. When the back torque is input, the lever vibration is greatly reduced by the structure that the clutch SPG (3 out of 6) is pushed up to control the pressure plate load, instead of the cam pushing up the pressure plate directly.
2. The slip torque can be adjusted only by changing the SPG, not by replacing the slipper cam body, so setting is easy (torque can be set using two types of upper and lower optional springs).
3. Durability is improved by using a steel cam.

Applicable model / year : '20- CBR1000RR-R (SC82) Race vehicle
EX pipe : Ti
Silencer : Ti
Product weight : 4.2kg (including silencer stay, STD : 7.7kg)
OIL exchange : OK
OIL filter : OK
Proximity exhaust noise : 100dB / 6000rpm

Remark :
Sprint Race specifications
It is a product for racing and a product for circuit driving. You cannot drive on public roads.
Regarding the volume, please check the noise regulations and race rules of the circuit you are driving.
The price of this item is over 300,000-(tax included), so cash on delivery cannot be settled.
Includes aluminum silencer stay.

The image muffler is a prototype. There are some differences from the products sold.

Applicable model / year : '20- CBR1000RR-R (SC82) Race vehicle
EX pipe : Ti
Silencer : Ti
Product weight: 4.4kg (including silencer stay, STD : 7.7kg)
OIL exchange : OK
OIL filter : OK
Proximity exhaust noise : 100dB / 6000rpm

Remark :
Endurance Race Specifications (Header pipe/Exhaust pipe split type)
It is a product for racing and a product for circuit driving. You cannot drive on public roads.
Regarding the volume, please check the noise regulations and race rules of the circuit you are driving.
The price of this item is over JPY 300,000-cash on delivery is not possible.
Includes aluminum silencer stay.

The image muffler is a prototype. There are some differences from the products sold.

It is used during maintenance (remove the oil line) and when storing the engine alone.
Use genuine parts to fix the plug.

Applicable model/year : '20- CBR1000RR-R (SC82)
Remark : Sold as a set of 2 (with O-ring)

Applicable model / year: '20- CBR1000RR-R (SC82) Race vehicle
Remarks : For Showa and Orleans suspension / For HRC stroke sensor

Applicable model / year: '20- CBR1000RR-R (SC82) Race vehicle
Remark: For Showa ST / HRC stroke sensor

Applicable model/year : '20- CBR1000RR-R (SC82)

Applicable model/year : '20- CBR1000RR-R (SC82) Race vehicle
Remark: Bolts and nuts are sold as a set.

LApplicable model/year : '20- CBR1000RR-R (SC82) Race vehicle
Remark : L/R set sale

Applicable model/year : '20- CBR1000RR-R (SC82) Race vehicle
Remark : It is a product for FRP cowl and carbon cowl.

Applicable model/year : '20- CBR1000RR-R (SC82) Race vehicle
Remark : It is a product for FRP cowl and carbon cowl.

Applicable model/year : '20- CBR1000RR-R (SC82) Race vehicle
Remark : It is a product for FRP cowl and carbon cowl.

SC82 Stand swing plate for genuine swing arm.

Applicable model/year: CBR1000RR-R(SC82)
Material : A2017 Surface treatment: Alumite treatment (red)
Remark : 4 mounting bolts included

When used in combination with TSR's REAR STAND TYPE-A13, the ground-tire (genuine tire) distance is about 22 mm.
The distance when mounted (outside hook part-outside hook part) is approximately 328 mm.

Currently in production. The first production will be shipped after the end of June. After completion, it will be shipped sequentially. After the shipment is completed, we will send you an email with the Yamato Transport slip number. The first production is sold out. The production for July will be shipped after July 20.

Conformity: '20- CBR1000RR-R (SC82)
When traveling on public roads, the length of the vehicle will change, so it is necessary to undergo structural changes (vehicle inspection).

Remark: The angle of the license plate is 40 degrees. Includes reflector / LED number light (waterproof coupler installed)
he image is a prototype.

Conformity: '20-CBR1000RR-R(SC82)

If you want to use the reverse change (race shift, 1UP-5DOWN) on SP model and vehicles equipped with genuine quick shifter, please purchase the optional product (part number: 24710-S82-000 ¥6,300-, tax not included).

-Use duralumin (A2017 material) for the step plate pedal, Direct operation feeling due to high rigidity which is the conventional design concept It reduces damage by flexing against the impact of falls.
-A genuine brake lamp switch can be attached
・Step bar position movement: Back 0mm/12mm
・Up 0mm/12mm
・It was adopted in Suzuka 8th #22 car (Satsu HATI. Honda Team Asia) The shape of the step bar is used.

Product weight: -kg (STD ratio: -kg)

*The image is a prototype.

Conformity: '20-CBR1000RR-R(SC82)

If you want to use the reverse change (race shift, 1UP-5DOWN) on SP model and vehicles equipped with genuine quick shifter, please purchase the optional product (part number: 24710-S82-000 ¥6,300-, tax not included).

-Use duralumin (A2017 material) for the step plate pedal, Direct operation feeling due to high rigidity which is the conventional design concept It reduces damage by flexing against the impact of falls.
-A genuine brake lamp switch can be attached
・Step bar position movement: Back 0mm/12mm
・Up 0mm/12mm
・It was adopted in Suzuka 8th #22 car (Satsu HATI. Honda Team Asia) The shape of the step bar is used.

Product weight: -kg (STD ratio: -kg)

*The image is a prototype.

We are currently in production, but we cannot produce in large quantities due to manual production.
It is expected that delivery will take several weeks. Thank you for your understanding.
The first shipment is planned after the end of June.

Regarding mail order orders, we will ship sequentially after completion.

After shipping, we will notify you by email such as Yamato Transport slip number.

Applicable model/year : 2020- CBR1000RR-R (SC82)
Material: plain weave carbon

We are currently in production, but we cannot produce in large quantities due to manual production.
It is expected that delivery will take several weeks. Thank you for your understanding.
The first shipment is planned after the end of June.

Applicable model/year: 2020- CBR1000RR-R (SC82)
Material: plain weave carbon

This front fender does not have a genuine brake hose clamp.
We recommend replacing the brake hose. (Be careful not to load the fender.)

The sprocket guard attached to the race machine can now be attached to the street machine
Designed and manufactured.
Use the boss of the stand hook and the adhesive tape for mounting.

Applicable model/year : CBR1000RR-R (SC82)
Material: carbon

Conformity: '20-CBR1000RR(SC82) TSR step kit/vehicle equipped with genuine quick shifter
Please purchase if you want to use reverse change (racer shift 1UP-5DOWN) on a vehicle equipped with a genuine quick shifter.

Product weight: -kg (STD ratio: -kg)
*The image is a prototype.

This is a titanium bolt set exclusively for LINK SET A / B (product number: 52460-LM20-A00/B00).
Made to order.

Applicable model/year: '20- CBR1000RR-R (SC82)
Remarks: Race-specific parts/set sales